Skip to main content
RoomSketch3DRoomSketch3D

How to Make Vaulted and Sloped Ceilings — RoomSketch3D

Go beyond a flat 8-foot ceiling. This guide shows how to sculpt vaulted, sloped, and shed-roof ceilings in RoomSketch3D by giving walls different heights, then viewing the result in 3D.

1 minUpdated 2026-11-02
Read the full step-by-step guide

What this video covers

  1. 1Select a wall and set its Height
  2. 2Raise one side for a shed ceiling
  3. 3Check the slope from outside
  4. 4Leave the low walls on Default
  5. 5For a ridge, use Vaulted Ceiling
  6. 6Change the whole floor's ceiling instead
  7. 7Check headroom under the low side

Prefer to read along? See the full written walkthrough with screenshots.

Start designing your room

Draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android