Skip to main content

Build a private arcade in 46 seconds — RoomSketch3D

Real arcades all use the same floor plan: the machines line the walls so their glow pulls you in, and the middle of the floor goes to the one game people crowd around. A 14×13 room runs the same play at home — an arcade cabinet, a claw machine, and a jukebox shoulder to shoulder along the top wall, a 96-inch air hockey table centered with about 30 inches of play room at both ends, and an 8×10 rug turned sideways underneath to keep the puck noise out of the room below. Every piece is a real RoomSketch3D catalog item at its true size with clearances checked — Build a private arcade, plan first, then a walk around it in 3D.

46 sUpdated 2026-08-28
Read the full step-by-step guide

What this video covers

  1. 1Draw the floor: 14 × 13, walls set open
  2. 2Line the glow wall: cabinet, claw, jukebox
  3. 3Center stage: the air hockey table
  4. 4Slide the rug under — sideways
  5. 5Prove it in 3D

Prefer to read along? See the full written walkthrough with screenshots.

Start designing your room

Draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android