Skip to main content

How much paint do I need? Wall square footage and a paint list from your floor plan

Open **Materials → Surfaces → Wall Paints**. Each **Apply to** choice shows the wall area it covers, and the **Paint needed** list gives every color's area and the paint to buy, with doors and windows taken off. Set **Coats** and how far a gallon (or liter) goes, then **Copy list** for the store. **Ceiling Paints** has the same list for ceilings.

6 minUpdated 2026-11-19

Before you buy paint you need one number: how many square feet (or square meters) of wall you're covering. Measuring every wall with a tape, then subtracting each door and window by hand, is slow and easy to get wrong. Your floor plan already knows every wall's length and height and every opening in it, so RoomSketch3D does that arithmetic for you.

In the Wall Paints tab of Materials → Surfaces, every Apply to choice shows the wall area it would paint: one wall, one room, or the whole floor. Below it, the Paint needed list adds up each color you've chosen (and the walls you haven't), and turns the area into gallons and quarts, or liters, to buy. The screenshots use the Medium 2-Bedroom Apartment template, a 30 × 26 ft apartment with 9 ft walls.

The short rule of thumb: wall area × coats ÷ coverage, rounded up. One gallon of wall paint typically covers about 350–400 sq ft per coat, and a liter typically covers about 10–16 m². The figure printed on your can is the one to trust.

What you'll need

  • •A floor plan with walls (any design, or a template)
  • •Optional: the coverage printed on your paint can

Step by step

  1. 1

    Open Materials → Surfaces → Wall Paints

    On a computer: open the Materials tab in the left panel and click Surfaces, then the Wall Paints tab at the top of the popup. On a phone: tap Materials under the plan; the popup opens on Surfaces, where you tap Wall Paints. The tab has two smaller tabs of its own, Interior and Exterior. Inside and outside paint are separate jobs (different paint, often a different painter), so each tab has its own wall picking, its own color choices and its own paint list: - Interior paints the inside face of every wall: the room side of the outer walls and both sides of every interior wall. - Exterior paints the outside face of the outer walls only. Interior walls are drawn faint there and can't be picked.

    Wall Paints on a computer: Interior | Exterior tabs, the plan and a wide 3D preview on top, the options and Paint needed below.
  2. 2

    Pick a wall: each Apply to choice shows its area

    Tap a wall on the small plan, from inside the room you mean (the side you tap picks the room). The Apply to choices now show the wall area each one covers, after the label: - This wall only (or This section only on a wall crossed by other walls): both faces of an interior wall, or the inside face of an outer wall. - This room only (it reads Only Kitchen when the room has a name): every wall face looking into that room. This is the number to use when you're painting one room. - All interior walls on this floor: every inside face on the floor. - On the Exterior tab: This wall only for the outside of that wall, and All exterior walls for the whole outside of the house. The areas are already net of doors and windows, so they're the square footage of paint, not of wall. Choosing a color isn't needed to see them: just pick the wall.

    Each Apply to choice shows the wall area it would paint, with doors and windows already taken off.
  3. 3

    Read the Paint needed list

    Paint needed sits beside the options on a computer (below them on a phone) and is always there, with or without a wall picked. It lists every color on the open tab, biggest area first, each with: - a swatch and the color's name: the brand name for a Behr, Benjamin Moore or Sherwin-Williams color you picked from the catalogs, or the hex code for a custom color; - its wall area and the rooms it's in (room names show when every room using that color has a name); - the paint to buy, on the right. Walls you haven't given a color yet are listed last as No color chosen (a dashed swatch), so the list always adds up to the whole floor. If you plan to paint everything one color, you don't need to pick a color at all: the No color chosen row is your total. The heading is Inside walls on the Interior tab and Outside walls on the Exterior tab. On a house with more than one floor the title reads Paint needed on this floor: switch floors in the floor picker to see each floor's list.

    Paint needed: every color with its wall area, its rooms and the paint to buy. Unpainted walls are listed last.
  4. 4

    Set coats and coverage

    At the top of the list, two settings turn area into paint: - Coats: 1, 2 or 3. It starts at 2, the usual advice for a new color or for even, full coverage. Use 1 only for a fresh coat of the same color over sound paint; use 3 for a big color change (dark to light, or a deep red or yellow). - One gallon covers (sq ft), or One liter covers (m²) when your design uses metric. It starts at 350 sq ft per gallon, or 10 m² per liter. Type the coverage printed on your can; it accepts 50–1000 sq ft per gallon or 1–30 m² per liter. The amounts are rounded up: to the next quart in gallons (for example 4 gal + 1 qt, or 3 quarts for a small room), and to the next whole liter in metric. Both settings are shared by the wall and ceiling lists and remembered on this device, so set them once.

    Coats and coverage at the top of the list. Type the figure from your paint can.
  5. 5

    Worked example: the Medium 2-Bedroom Apartment

    With its 9 ft walls, the template's inside walls come to 1,747 sq ft of paint once its windows, doors and openings are off: 674 sq ft in the Living & Kitchen, 374 sq ft in Bedroom 2, 364 sq ft in the Primary Bedroom and 335 sq ft in the Bathroom.

    Paint the two bedrooms Sherwin-Williams Evergreen Fog and the Living & Kitchen Agreeable Gray, and leave the bathroom for now. At 2 coats and 350 sq ft per gallon, the list reads:

    ColorRoomsAreaTo buy
    Evergreen FogBedroom 2, Primary Bedroom738 sq ft4 gal + 1 qt
    Agreeable GrayLiving & Kitchen674 sq ft4 gallons
    No color chosenBathroom335 sq ft2 gallons

    The bedrooms: 738 × 2 ÷ 350 = 4.2 gallons, rounded up to the quart. At 3 coats the same rows read 6 gal + 2 qt, 6 gallons and 3 gallons. The outside walls are 944 sq ft (5 gal + 2 qt at 2 coats) and the ceilings 730 sq ft (369 sq ft in the Living & Kitchen, 360 sq ft in the other three rooms).

  6. 6

    Copy the list for the paint store

    Tap Copy list (it turns to Copied for a moment) and paste it into a note, a text message or an email. The copy has a heading with the number of coats, the section (Inside walls or Outside walls) and one line per color, for example: Paint needed (2 coats) Inside walls Evergreen Fog: 738 sq ft, 4 gal + 1 qt Agreeable Gray: 674 sq ft, 4 gallons No color chosen: 335 sq ft, 2 gallons The list names the color, not the brand or its code, so add those to the note before you go (the color picker shows both). That's everything the person at the counter needs to mix and measure it. Copy the Interior and Exterior lists separately, and the ceiling list from Ceiling Paints.

  7. 7

    Exterior: the outside of the house

    Switch to Exterior to price the outside. Only the outer walls can be picked, the 3D preview looks at the wall from outside, and the Paint needed list shows Outside walls. The outside faces are measured corner to corner around the outside of the walls, so they're a little longer than the inside faces of the same walls. Windows and doors come off here too. All exterior walls shows the whole outside area on a one-floor plan. On a house with several floors it reads All exterior walls (all floors) and has no area beside it, because it paints more than this floor: add up each floor's Outside walls list instead.

    The Exterior tab: outer walls only, measured outside corner to corner, with its own paint list.
  8. 8

    Ceilings: the same list in Ceiling Paints

    Ceilings aren't in the wall list (its small print says Ceilings are under Ceiling Paints). Open the Ceiling Paints tab next door: Ceiling paint needed lists each ceiling color with the rooms it's in, the area and the paint to buy, at the same coats and coverage. Rooms still on the default white with no color chosen are the No color chosen row. The area is each room's flat ceiling inside the walls, the same as its floor area. A sloped or vaulted ceiling has more surface than that, and the list says so (A vaulted ceiling has more surface than this), so add a margin there. If you buy a paint made for ceilings, type the coverage from its can: the coverage box is shared with the wall list.

    Ceiling Paints has its own list: flat ceiling area per color and the paint to buy.
  9. 9

    On a phone: the 3D preview is a pill

    On a phone the popup is one column: the tabs, the small plan, the options and then the Paint needed list, so scroll down for the list. The 3D preview is optional there, which leaves room for the numbers: tap the 3D preview pill at the bottom right to open it in a small window. Drag the window by its title bar to move it out of the way, resize it from a corner, and close it with ×. Your phone remembers whether you left it open and where. This works on all three Surfaces tabs.

    On a phone, tap the 3D preview pill to open a small window you can drag and resize.

Tips

Use the room total, not the floor area

A common shortcut is "floor area × 3" or "perimeter × height". It ignores the openings and the actual wall height. The This room only number is the wall area you'd paint, measured from your plan, with every door and window off.

Gallon versus 5-gallon

Above about 4–5 gallons of one color, a 5-gallon bucket is usually cheaper per gallon than single gallons, and the whole job is one batch of tint. Below a gallon, the list shows quarts so you don't overbuy for a small bathroom or an accent wall.

Keep a little extra

The list rounds up to the next quart (or liter), so there's usually a little left over. For touch-ups later, keep a labeled quart of each color. Rough or porous walls (fresh drywall, textured plaster, brick, stucco, bare wood) soak up more paint: lower the coverage figure rather than guessing an extra gallon.

Check the color, then the count

Choose the colors with the live 3D preview first (paint your walls explains the picker and Apply to), then read the Paint needed list. Changing a color moves its area from one row to another, so the list is always for the plan as it is now.

Common mistakes

Expecting trim, primer or the ceiling in the wall number

The wall list is wall surface only. Baseboards, door and window casings and crown molding aren't counted (they usually take a different, glossier paint, and a quart or two covers a room's trim). Primer isn't included either: a gallon of primer typically covers less than paint (Sherwin-Williams gives about 200–300 sq ft), so work it out separately when you need it. Ceilings are in Ceiling Paints.

Forgetting the wall above the ceiling line under a vault

Walls are measured up to the flat ceiling height. Under a vaulted or cathedral ceiling, the triangle of wall above that line (a gable end) isn't counted, and the list says so (Wall above it under a vaulted ceiling is not included). Add it yourself: half its width × its rise.

Reading one floor as the whole house

On a multi-floor house, the lists are for the floor you're on (Paint needed on this floor). Switch floors and add the lists together.

Wrong units for the coverage

The box reads One gallon covers (sq ft) in a feet-and-inches design and One liter covers (m²) in a metric one. A can that says 10–12 m²/L goes into a metric design as 10; in a feet-and-inches design, use the can's sq ft per gallon figure. Each unit system keeps its own coverage, so switching units never turns 350 into nonsense.

Frequently asked questions

How do I find the square footage of my walls?

Open Materials → Surfaces → Wall Paints and tap a wall. The Apply to choices show the area of that wall, of the whole room (This room only) and of every interior wall on the floor. The Paint needed list below shows the total for each color. All of them already have doors and windows taken off.

How many gallons of paint do I need for a room?

Wall area × coats ÷ coverage, rounded up. A typical gallon covers 350–400 sq ft per coat, so a room with 374 sq ft of wall needs 374 × 2 ÷ 350 = 2.1 gallons for two coats: 2 gal + 1 qt. RoomSketch3D does this for every color in the Paint needed list; type your can's coverage for the exact figure.

Are doors and windows subtracted?

Yes: every door type (including sliding, French, pocket, barn, Dutch and garage doors), every window (including bay windows) and every wall opening, at its own width and height. Things on the wall that you paint around, such as outlets, switches and mirrors, aren't subtracted. The small reveal inside a door or window opening isn't added.

Is the wall counted twice where rooms share it?

No. A shared interior wall has two faces, one in each room, and each face is counted once, in the room it faces. A long wall that runs past several rooms is counted once along its length, and a wall's own thickness isn't counted as wall. Inside faces are measured as long as the room is inside, so a 12 ft room has 12 ft walls.

Does it work in metric?

Yes. In a metric design the areas show in m², the coverage box reads One liter covers (m²) (starting at 10) and the amounts are whole liters, rounded up.

What does "No color chosen" mean?

Walls (or ceilings) you haven't given a color yet. They're listed so the list always covers the whole floor. If you're painting everything one color, that row is your total and you don't need to pick a color first.

Does the list include the outside of the house?

Yes, on its own tab: switch Wall Paints to Exterior for the Outside walls list. Interior and Exterior are kept apart because they're different paints.

Why does the area differ from my tape-measure total?

Usually the wall height (check the floor's ceiling height and any walls you set higher or lower), the openings (each one comes off), or measuring the centerline of walls instead of the face you paint. The app measures the face you see. If your plan's walls or heights don't match the real room, fix the plan first: see wall and ceiling heights.

Why does the list show a different name from the paint I picked?

The list names a color by its exact shade. A few catalog colors share the very same shade under two names (for example Benjamin Moore's Pale Oak and Athena), and then the list shows the first name it finds. The shade, area and amount are right; check the name and code in the color picker before you order. A custom color shows as its hex code.

Does the paint list change my design?

No. It's display only. Coats and coverage are remembered on your device, not saved in the design.

Sources

Start designing your room

Put this into practice in the floor planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android