Template 3 of 93 · Houses
Three-Story Townhouse floor plan template
2,100 sq ft on three floors, 20 ft wide: a 1-car garage, home office, powder room and storage on the ground floor; an open kitchen, dining and living room with a balcony in the middle; two bedrooms with their own baths and a laundry on top, under a cathedral ceiling.
20 × 40 ft · 46 pieces already placed at their true size · fully editable
$19.99 one-time · No subscription · Money-back guarantee
At a glance
A twenty-foot-wide townhouse on three floors? Don't start from a blank canvas. The Three-Story Townhouse template opens as a complete design — 20 by 40 feet with 46 pieces placed at their real dimensions, including standard desk, ergonomic chair, office bookshelf, 2-seat office sofa, and compact toilet.
Below, the walk-through step by step with a screenshot of each moment, then everything that's placed in the plan.
It is a starting point, not a finished answer. Tap a wall and type your own length, and the plan resizes. Select a piece and change its size to the one you own, or delete it and drop in something else. Then switch to 3D and walk through it before you buy, build, or sign anything.
Three floors with the stairs between them: the template opens on the ground floor, with the garage and office (switch floors in the editor). In the picker, the template's page shows all three floors, and the piece count covers all of them.
For the planning rules behind this layout, read the Multi-story floor plans guide (floors and stairs).
What's placed
- Standard desk
- Ergonomic chair
- Office bookshelf
- 2-seat office sofa
- Compact toilet
- Pedestal sink
- 4-tier shelf
- Sedan
- Refrigerator
- Base cabinet
- Range
- Sink base
- Dishwasher
- Wall range hood
- Small island
- Counter stool
- Rectangle
- Side chair
- Pendant light
- Tv console
- Area rug
- Coffee table
- 3-seater sofa
- Queen bed
- Small nightstand
- Wardrobe
- Tall dresser/chest
- Tub/shower combo
- Elongated toilet
- Vanity
- Walk-in shower
- Stackable washer + dryer
- 6-drawer dresser
46 pieces in total, each at its true size. Not the piece you own? Type its exact width, depth, and height.
From template to your room, step by step
- 1
Tap New Design, then Use Template
Every design starts from the New Design sheet. Use Template is the tile marked Pre-designed layouts — the furnished starting points, not blank rooms.
- 2
Search for it, or tap the Houses chip
The gallery shows every template as a full-colour plan picture. Type its name in the search box, or tap the Houses chip to see only that group. The card shows Three-Story Townhouse's footprint and its 3 floors.
- 3
Open its page, name your design, tap Use this template
Tapping the card opens the template's own page: the plan (a tab for each floor), 20 × 40 ft, the floor area and the 46 items, with a short description. Give your design its own name in Name your design (it starts as "Three-Story Townhouse"), then tap Use this template.
- 4
It opens as a complete, editable design
Nothing is placeholder: standard desk, ergonomic chair, office bookshelf, and 2-seat office sofa are already in the plan at their real dimensions, and the layout opens with a clean Smart Flow Check.
- 5
Make it yours — resize the walls, swap any piece
Tap a wall and type your real length, or drag it. Select any piece to change its size to the one you own, recolour it, or delete it and drop in something else from the catalog.
- 6
Walk it in 3D
One tap switches to 3D. Orbit the room or walk through it at eye level to judge the layout before you buy, build, or sign anything — then export an image or PDF when it's right.
Frequently asked questions
How do I open the Three-Story Townhouse template?
In RoomSketch3D tap New Design, then Use Template. Search for "Three-Story Townhouse" or tap the Houses chip, then tap Three-Story Townhouse. Its page shows the plan, footprint and item count; name your design and tap Use this template, and it opens in the editor as a normal design.
My room isn't 20 × 40 feet. Can I still use it?
Yes — that's the point. The template is a starting point: tap any wall and type your real length, or drag it, and the plan resizes. Then move or remove pieces so the layout fits your room.
Can I swap the furniture for what I actually own?
Yes. Select any piece and type its exact width, depth, and height, or delete it and drop in the piece you want from the catalog. Anything not in the catalog can be a custom-size piece.
Is the template included in the price?
Yes. Every template, the full furniture library, custom sizes, 3D, and export are all part of the one-time $19.99 purchase. No subscription.
Start from the Three-Story Townhouse — then make it yours
RoomSketch3D — $19.99 once on the App Store. Templates are where you start, not where you stop.
One-time purchase. No subscription ever.