Knobs & pulls — real hardware on every cabinet and wardrobe
Give every cabinet, wardrobe, dresser, and buffet real door and drawer hardware — knob or pull, sized to the inch, in the finish you'll actually order — and see it in 3D.
Hardware is the jewelry of a room. Every cabinet, wardrobe, dresser, and buffet in RoomSketch3D carries configurable door and drawer hardware: pick the type — Knob, Bar pull, Cup pull, Edge pull, or Ring pull — set its exact size, and choose a finish from brushed nickel to matte black and more. It all renders in 3D, where handles used to be a plain grey stub.
Every configurable piece starts with a sensible default — a knob on chests of drawers, a bar pull on cabinets and wardrobes, both in brushed nickel — so a fresh design already looks finished. Hardware is per-piece, so you can change one cabinet or, in a tap, every one on the floor.
What you'll need
- •A design with a cabinet, wardrobe, dresser, or buffet
Step by step
- 1
Select a cabinet or wardrobe
Tap any cabinet, wardrobe, dresser, closet, or buffet on the canvas. Its inspector opens with a Hardware row — the same control across kitchen base and wall cabinets, tall and floating cabinets, wardrobes, dressers, nightstands, and buffets.
Select a cabinet — the Hardware row sits right in its inspector. - 2
Pick the type
Choose Knob, Bar pull, Cup pull, Edge pull, or Ring pull — or None for a handle-free, push-to-open look. The choice changes the mesh on every door and drawer front of the piece at once.
Five hardware types, plus None — pick the shape you'll install. - 3
Size it to the inch
Knobs and ring pulls are sized by Diameter (1", 1¼", 1½"); bar, cup, and edge pulls by Length — their centre-to-centre span (3", 3¾", 5", 6¼", 8"). Tap a preset, or type any exact size in the field for hardware you already own.
Presets for the common sizes — or type the exact measurement. - 4
Choose a finish
Tap a finish swatch: Brushed nickel, Matte black, Brass, Chrome, Oil-rubbed bronze, or White. Each is a real material in 3D, so brass reads warm and chrome reads bright — no guessing from a flat colour chip.
Six real finishes — from brushed nickel to matte black. - 5
Apply to all, then see it in 3D
Happy with the look? Apply to all cabinets & drawers copies this exact type, size, and finish to every configurable piece on the floor — one hardware throughout a kitchen in a single tap. Then switch to 3D: the handles render on every front, at true size, in your chosen finish.
Real handles on every door and drawer, rendered in 3D.
Tips
One kitchen, one hardware
Set the hardware you want on a single base cabinet, then Apply to all cabinets & drawers — the whole run matches instantly, the way a real kitchen ships with one handle family.
Knobs on drawers, pulls on doors
A classic Shaker look pairs knobs on the upper doors with bar pulls on the deep drawers. Because hardware is per-piece, configure each cabinet on its own for that mixed, custom feel.
Match hardware you already own
Measure your real pull centre-to-centre (or a knob across its face) and type that exact number in the size field — the 3D handle matches what's in the drawer of spares.
Common mistakes
Looking for hardware on the wrong piece
The Hardware row only appears on pieces with doors or drawers — cabinets, wardrobes, dressers, nightstands, and buffets. A freestanding garment rack or a plain table won't show it, because there's nothing to put a handle on.
Reading a pull's size as its overall length
Pull sizes are the centre-to-centre hole spacing — the number you order by — not the handle's full end-to-end length, which runs a bit longer. Knobs and ring pulls, by contrast, are sized by diameter.
Frequently asked questions
Which furniture takes hardware?
Kitchen base, wall, tall, and floating cabinets, plus wardrobes and closets, dressers and nightstands, and buffets. Anything with doors or drawers. Vanities and open garment racks don't, since their 3D models carry no handle.
Can each cabinet have different hardware?
Yes — hardware is stored per piece, so you can mix knobs and pulls, sizes, and finishes across a room. Use Apply to all cabinets & drawers only when you want one look everywhere.
Do the finishes render realistically in 3D?
Yes. Each finish is a real material — brass is warm and slightly rough, chrome is bright and mirror-like, matte black is dark and low-sheen — so the 3D view previews the actual look, not a flat swatch. Screen colour still varies by display.
Does hardware survive saving and exporting?
Yes — your type, size, and finish are saved with the piece and travel through save, import, and the 3D model export.
Start designing your room
Draw it, furnish it, walk through it in 3D — on web, iOS, and Android.
Open RoomSketch3DOne-time purchase · No subscription · Web, iOS & Android