Skip to main content

Yard zones: lawns, patios, paths and garden beds

Add a yard from the Floors menu, then open Build → Outdoor (Yard Zones on a phone) and pick a zone: Lawn, Flower Bed, Patio, Walkway, Mulch Bed, Play Area, Driveway, Pool Deck, Vegetable Garden, BBQ Area or Fire Pit Area. Move the crosshair to a starting point and pull the blue handle to each corner, in Straight or Curve mode. A lawn always stays underneath the other zones, so draw it last over the whole lot.

8 min readUpdated 2026-11-17

Yard zones are the ground surfaces of your garden: the lawn, a paved patio, the driveway, a garden path, flower and vegetable beds, a play area, the slab around a pool, a gravel circle for the fire pit. Each zone is a shape you draw on the lot around your house, with its own material and colour. The plan shows it with its name and area, and the 3D view shows it as real grass, pavers, asphalt, mulch or gravel.

The short version: Floors menu → Add Yard gives the house a lot to sit on. Then Build → Outdoor (on a phone, the Yard Zones button) lists eleven zone types. Tap one, move the purple crosshair to where the zone starts, and pull the blue handle to each next corner. Release near the first point to close the shape. Straight mode gives clean corners for patios and driveways; Curve mode follows your drag for kidney-shaped beds. A Walkway is a path: you draw its centre line and set its width.

This guide walks through a real 30 × 24 ft house on a 60 × 54 ft lot, drawn from scratch: a driveway, a bent front walk, a back patio, a curved flower bed and a lawn over the rest. It also covers editing zones, how they look in 3D, the sizes worth planning to (paths, driveways, patios, pool fences, fire pits), and the things that currently trip people up.

What you'll need

  • •A design with a house outline on the ground floor

Step by step

  1. 1

    What a finished yard looks like

    On the Showcase Home sample, the back garden is built from zones: a light Pool Deck slab around the pool and hot tub, a paved Patio under the pergola, a gravel Fire Pit area with its chairs, a dark-soil Vegetable Garden and a tanbark Play Area, all sitting on the lawn. The pool, hot tub, pergola, chairs and trees are items from the Outdoor tab of the furniture panel, placed on top of the zones the same way furniture sits on a floor. Each zone shows its name and its area on the plan (here Patio 373 sq ft, Fire pit 136 sq ft), which is handy when you're pricing pavers, sod or gravel by the square foot.

    A back garden made of zones: pool deck, patio, fire pit area and vegetable garden, with outdoor items on top.
  2. 2

    Add a yard around the house

    Zones are drawn on a yard, so add one first. Open the Floors menu (tap the floor name at the top of the left panel) and tap Add Yard at the bottom. It works from any floor; the yard always belongs to the ground floor. The Yard Editor opens with a rectangular lot that reaches 15 ft past the house on every side, the house shown faintly as a guide. Drag the corners to match your property, use Split Boundary or Add Boundary for an odd-shaped lot, set fences per edge with Boundary Style and Edit Boundary Length/Height, then tap Update Yard Plan. A new lot starts as bare earth: no grass until you draw a lawn. The lot, the property line and fences are covered in detail in Add a yard, property line and fences.

    Add Yard opens the Yard Editor with a lot 15 ft wider than the house on every side.
  3. 3

    Open the Yard Zones

    On a computer, open Build in the left panel; once the design has a yard, it has two tabs, Indoor and Outdoor. Tap Outdoor to see Yard Zones. On a phone or tablet, tap the Yard Zones button in the row above the plan.

    There are eleven zone types. Each one starts with a ground cover that suits it, and you can change it afterwards:

    ZoneStarts as
    LawnLawn (grass)
    Flower Bedred bark mulch
    Patiogrey pavers
    Walkwaytan pavers, a 4 ft wide path
    Mulch Bednatural mulch
    Play Areatanbark
    Drivewayasphalt
    Pool Decklight concrete
    Vegetable Gardendark mulch (garden soil)
    BBQ Areaconcrete
    Fire Pit Areagravel

    The tile swatches show the real material you'll see in 3D. Zones are only for the ground floor's yard: on an upper floor the Yard Zones aren't listed, so switch to the ground floor first.

    Build → Outdoor: the eleven zone types, each previewing its ground cover.
  4. 4

    Start a zone: crosshair and blue handle

    Tap a zone tile. A purple crosshair appears in the part of the lot you're looking at (inside the lot, outside the house) and pulses until you place the first point; the house and everything in it fade back so the lot stands out. A tip at the bottom reads Move the crosshair to the driveway's starting point, then drag the blue handle to draw. 1. Drag the crosshair to the first corner of the zone. 2. Drag the blue handle (the tab on a short cord next to the crosshair) and let go where the next corner should be. The new side always runs from the crosshair, wherever you grab the handle, so your finger never hides the corner you're placing. Zoom and pan the plan as usual while you draw; only the crosshair and the handle respond to a drag. The X on the tip cancels the zone.

    The crosshair marks the start; the blue handle draws each side.
  5. 5

    Draw straight sides, then close the shape

    In Straight mode (the default), each pull of the handle adds one corner where you let go. While you pull, a red cursor shows where the corner will land, a green dashed line shows the new side, and a magnifier in the corner shows the spot under your finger. The drawing helps you line things up: - Right angles: a side within about 10° of horizontal, vertical or 45° snaps to it. - Line-ups: a yellow guide appears when the corner is level with, or straight above or below, a corner you already placed. - The lot edge: corners snap onto the property line and its corners. On the edge, a pill under the magnifier shows the distance to the edge's two ends, so you can place a driveway exactly 12 ft from the side fence. Corners outside the lot aren't added. To finish, pull the last side back to the first point: the zone closes and is saved. You can also tap Finish once there are 3 points. Pressing Undo while you draw removes the last point.

    Straight mode: one corner per pull. Pull back to the first point to close.
  6. 6

    Curved beds and borders: Curve mode

    For a kidney-shaped flower bed, a curved border or an organic lawn edge, switch the tip to Curve before you pull. Now the outline follows your drag: a point is added roughly every 2½ ft as you move, so you can trace the whole shape in one long pull and let go near the start to close it. Fewer, well-spaced points also keep the shape easy to adjust later. A zone remembers how it was drawn: Straight-mode zones keep sharp corners, Curve-mode zones are smoothed between their points. You can switch any zone later with Corners in its panel (next step). If a freehand outline ends with a small spike where you closed it, select the zone and drag that point into line.

    Curve mode traces your drag: a freehand flower bed in one pull.
  7. 7

    Paths: the Walkway zone

    A Walkway works differently: you draw its centre line, not its outline. Place the crosshair at one end (the front door, say), pull the handle to each bend, and tap Finish when you reach the other end; two points are enough for a straight path, and a walkway never closes on itself. The path is drawn 4 ft wide around the line. To change the width, tap the walkway and use Width in its panel: anything from 1 ft to 8 ft ((1 ft – 8 ft) next to the box). A Driveway, by contrast, is a normal shape: draw its four corners like a patio.

    A walkway is a centre line with a width you can change: 1 to 8 ft.
  8. 8

    Draw the lawn last: it stays underneath

    The quickest way to grass a whole yard is one big Lawn zone: snap its four corners to the corners of the lot. You don't have to cut holes for the patio, driveway or beds. A lawn always lies beneath every other zone, whatever order you drew them in, the way a rug lies under furniture. So draw the driveway, paths, patio and beds first and the lawn over the rest last, and they stay on top. Tapping a patio inside the lawn selects the patio. Among the other zones, the one drawn later sits on top where two overlap. On the plan, zones are trimmed to the lot and never paint over the house. The area on a zone's label is the area of the shape you drew, so a lawn drawn over the whole lot shows the lot's full area (here 3240 sq ft), including the parts under the house, the patio and the driveway. For the grass alone, subtract those.

    Drawn last over everything, the lawn still lies under the driveway, path, patio and bed.
  9. 9

    Change a zone: name, corners, material and colour

    Tap a zone to select it. Its outline turns green, a point appears at each corner, and its settings open (a floating card over the plan on a tablet or computer that you can drag out of the way; a panel along the bottom on a phone): - Name: type a new one (Back patio, Herb bed); it shows on the plan. - Corners: Straight or Smooth (not for walkways). - Material: Lawn, Pavers, Concrete, Deck, Gravel, Mulch, Tanbark or Asphalt, with colour swatches for the chosen material. A wooden deck at ground level is a Patio (or any zone) with Deck picked here. - Trash can: deletes the zone. The Delete key does the same on a computer, and Undo brings it back.

    A selected zone's panel: name, Corners, Material, colour and delete.
  10. 10

    Reshape or resize a zone

    With a zone selected, drag any of its corner points to reshape it; the area on the label updates as you drag. Each point moves on its own, so to make a rectangular patio bigger and keep it rectangular, drag both corners on the side you're enlarging (here only one corner was dragged, so the side slanted). One drag is one Undo step. Today you can't move a whole zone in one go, add a point to an existing zone, or type a zone's exact width and length (except a walkway's width). For a zone in a very different place or shape, delete it and draw it again; it takes seconds with the snaps.

    Drag a corner point to reshape. Each point moves on its own.
  11. 11

    See the yard in 3D

    Open 3D View: each zone is a real surface on the ground, grass for lawns, laid pavers, poured concrete, asphalt, bark mulch, tanbark, gravel and deck boards, in the colour you picked, inside the lot's fences. An empty part of the lot is bare earth. Pools are sunk into the ground through the zones around them, and outdoor items (trees, pergolas, play sets, fire pits, patio furniture) stand on top. Yard in the View options menu at the bottom right of the 3D view hides or shows the whole garden (the same setting as View & Layers → Show yard); see Hide the yard. Save image saves the view, and the AI Render Studio can turn it into a photo-style picture of the garden.

    Zones in 3D: pool deck, patio, fire pit gravel, play-area tanbark and lawn.
  12. 12

    Zones show no colour? Turn on Show flooring

    Zone colours and textures on the plan belong to the Show flooring layer, the same switch as room floorings. In a new design that layer starts off, and drawing a zone doesn't switch it on yet. So if your zones appear only as a name and an area with no fill, open View & Layers (the first button above the plan) and tick Show flooring, in the Floors, ceilings & yard group (ticking the Interior design view turns it on too). The choice is saved with the design. The zones are there all along; the 3D view always shows them. The names and areas follow Show room labels in the same menu.

    View & Layers → Show flooring paints the zones on the plan.

Tips

Hardscape first, lawn last

Draw what's paved or planted (driveway, walkway, patio, beds, pool deck), then one lawn over the whole lot. The lawn always stays underneath, so you never have to trace around the other zones.

Use the lot edge as your ruler

Corners snap onto the property line, and the pill under the magnifier shows how far along the edge you are. Start a driveway at the street edge, a set distance from the side fence, and its sides snap square.

Size paths to how they're used

The ADA's 36-inch minimum clear width (2010 Standards, 403.5.1) is the floor for anyone with a wheelchair or a stroller; two people walking side by side are more comfortable on 48 inches (the walkway's default), and 60 inches lets two wheelchairs pass (403.5.3). Garden stepping paths can be 2 to 3 ft. Set the walkway's Width to match.

Size the patio around the furniture

Common planning sizes: about 6 × 6 ft for a bistro table for two, 10 × 10 ft for a round table for four with chairs pulled out, 10 × 12 ft for a table for six or for a sofa, two chairs and a coffee table, and about 12 × 16 ft to dine and lounge on one patio. Place the patio set from the Outdoor tab and let the label's area confirm it. Details in Outdoor patio and yard layout.

Driveway widths

As a planning guideline, a single-car driveway is usually 10 to 12 ft wide and a two-car driveway 20 to 24 ft; leave room to open car doors beside parked cars. Local rules on driveway width and curb cuts vary, so check with your city.

Name zones for your shopping list

Rename zones (Sod front, Sod back, Pavers patio) and each label shows its area: square feet of sod, pavers or mulch to order. Remember a lawn's label counts the whole shape you drew.

Fire pits need distance from the house

The International Fire Code (307.4.2) keeps recreational fires 25 ft from structures and combustible material, and portable outdoor fireplaces 15 ft (307.4.3, with an exception at one- and two-family homes). Many towns change these, so check yours, then place the Fire Pit Area zone and the Fire Pit item accordingly.

Common mistakes

Drawing the lawn first and losing the patio

Not a problem any more: a lawn always lies under the other zones, whatever order you drew them in. If a patio still seems hidden, it's probably two non-lawn zones overlapping; the one drawn later wins.

Zones that look invisible

If a zone shows only a label, the Show flooring layer is off. Tick View & Layers → Show flooring. If even the label is missing, Show room labels is off, or the whole yard is hidden (View & Layers → Show yard).

Drawing a big lawn straight across the house

On the plan a zone never paints over the house, but in the 3D view a zone that runs under the house currently shows inside it, over the house floor. If the 3D view matters, draw the lawn in pieces around the house (front, back and sides) and end each piece at the house walls.

Clicking points instead of pulling the handle

Tapping the plan doesn't add a point; pulling the blue handle does. Move the crosshair to the start, then drag the handle to each next corner.

Expecting a Deck or Water Feature tile

There isn't one. A ground-level deck is any zone with the Deck material (or Build → Balcony / Patio for a raised deck with railings attached to the house), and water is an item: a pool, hot tub or fountain from the Outdoor tab.

Expecting the yard in a PDF or print

Today PNG, PDF and Print draw the house only: the lot, its fences and zones outside the house are left out, and a zone drawn across the house can tint the house floor in the file. To share the yard, use Save image in the 3D view or a screenshot of the plan.

Planning a pool without its barrier

The CPSC's pool barrier guidelines call for a barrier at least 48 inches high with no more than 4 inches under it (2 inches over grass or gravel) and self-closing, self-latching gates; many local codes require more. The lot's fences can be set from 3 to 8 ft per edge in the Yard Editor; there's no separate fence piece to ring just the pool today.

Frequently asked questions

How do I add grass to my yard?

Add a yard (Floors menu → Add Yard), then Build → Outdoor (or Yard Zones on a phone) → Lawn, and draw the lawn's corners on the lot. To grass everything, snap its four corners to the lot's corners; patios, paths and beds stay on top of it.

How do I draw a patio?

Tap Patio in the Yard Zones, drag the crosshair to one corner, then pull the blue handle to each next corner and back to the first to close. Change its material (Pavers, Concrete, Deck, Gravel…) and colour in its panel.

How do I draw a curved path or garden bed?

For a bed or border, switch the drawing tip to Curve and trace the shape in one drag. For a path, use Walkway: draw its centre line through each bend and tap Finish; the path follows each bend, and you set its width (1 to 8 ft) in its panel.

My zone won't draw. What's wrong?

Check three things: the yard exists (zones need Add Yard first) and you're on the ground floor; you're dragging the crosshair or the blue handle, not tapping the plan; and your corners are inside the lot (points outside it aren't added). If the zone was drawn but you can't see it, tick View & Layers → Show flooring.

The lawn covers my patio. How do I fix it?

A lawn always lies beneath other zones, so a patio on a lawn shows on top. If something still covers your patio, it's another non-lawn zone drawn after it; delete and redraw that one, or reshape it so they don't overlap.

How do I plan a pool area?

Draw a Pool Deck zone where the paving goes, then place a pool and hot tub from the Outdoor tab of the furniture panel on top; in 3D the pool is sunk into the deck. Plan a barrier of at least 48 inches around the pool area with self-closing, self-latching gates (CPSC) and check your local code.

Can I make a deck outside?

For decking on the ground, draw a zone (Patio is a good start) and pick Deck as its material. For a raised deck with railings attached to the house, use Build → Balcony / Patio and tap an outside wall.

Can I type a zone's exact size?

Not directly; you draw it. Use the lot-edge snaps and the distance pill to place corners precisely, and the label's area to check it. A walkway's width can be typed (1 to 8 ft).

How do I delete a zone?

Tap it and use the trash can in its panel, or press Delete on a computer. Undo brings it back.

Why is the Lawn label in the middle of my house?

A zone's label sits at the centre of the shape you drew. A lawn drawn over the whole lot is centred on the lot, which is often where the house is. The lawn itself isn't drawn over the house.

Can I draw zones on the second floor?

No. The yard belongs to the ground floor, so the Yard Zones are listed there. From an upper floor, switch to the ground floor first.

Can I hide the zones to work on the house?

In a design with a yard around the house, untick View & Layers → Show yard (or Yard in the 3D view's View options menu, the same setting). Zones, the lot, fences and outdoor items are hidden in the plan and in 3D until you turn it back on or tap Yard hidden; nothing is deleted. Picking a zone tool turns the yard back on. See hiding the yard.

Does it work on a phone and on a rotated plan?

Yes. On a phone the zones are under the Yard Zones button and you draw with the same crosshair and handle by touch. Drawing also works when you've rotated the plan view.

Sources

Start designing your room

Put this into practice in the floor planner: draw it, furnish it, walk through it in 3D — on web, iOS, and Android.

Open RoomSketch3D

One-time purchase · No subscription · Web, iOS & Android